0

Alan Gibson Wheels and Bearings
EM Gauge (18.2mm)
OO Gauge (16.5mm)
P4/S4 Gauge (18.83mm)
Cooper-Craft
Cooper-Craft 4mm Lineside
Cooper-Craft 16mm Wagons
Cooper-Craft 16mm Lineside
4mm Accessories
4mm Lineside
Wagon Bogies
Etched Tie Bars
Misc. Accessories
Underframe Kits
4mm Wagon Kits
4mm Transfers
4mm Transfers Pre-Grouping
4mm Transfers SR
4mm Transfers LMS
4mm Transfers LNER
Private Owner
SR Pre Grouping (LBSC, LSWR, SECR)
SR
LNER
LMS & MR
GWR & Cambrian
BR Salmons and Borail
BR Steel Carriers
BR Engineering
BR Open Wagons
16mmNG
Axleguards
Bogies
Brakegear
Lineside
Loco and Rolling Stock Parts
Signal Parts
Transfers
Wheels
Cooper-Craft Wagon Kits
3mm Wagon Kits
Metal Materials
Brass Micro Section
Brass Flat Section
Brass L Section
Brass T Section
Brass U Section
Brass Half Round Section
Brass Half-Round Tube Section
Brass Square Profile
Metal Bar or Rod
Brass Square Bar
Brass Round Bar or Rod
Metal Strip
Brass Strip 0.2mm thick
Brass Strip 0.5mm thick
Nickel Silver Strip 0.3mm thick
Phosphor Bronze Strip 0.15mm thick
Phosphor Bronze Strip 0.3mm thick
Metal Wire
Brass Wire
Phosphor Bronze Wire
Nickel Silver Wire
Soft Iron Wire
Metal Tube
Metal Sheet
Nickel Silver Sheet
Special Orders

C20 BR OTA-A 46tonne GLW TIMBER WAGON (1985)

C020
£14.70
Pre-order
1
Product Details
Manufacturer: Cambrian
Wheel Type required:: 12mm Air Braked Disc
Paint required:: See instruction sheet
Transfers required:: See instruction sheet
Other items required:: Couplings and dummy Coupling Hooks
Price Code: E
Weight: 38g

125 of the OCA wagons were converted in 1985 to OTA timber wagons. They were used to carry softwood to paper mills. Seen mainly in the South West, Wales, the North & Scotland. The number of locations served was reduced after the end of the Speedlink service. All were out of use by the end of 2007, and a number had previously been written off in a serious derailment in 2002 at Quintinshill caused by a failed bearing.

OTA-As had either 11 or 13 stanchion sockets; either of which can be made from the kit.
More recently some of the stanchions & sockets have been removed leaving only 8 on each side.
Includes a capping strip for making the flat-topped-end version (shown in the smaller picture).

We stock wheels for this kit in OO, EM and P4/S4.

LINK TO PDF INSTRUCTION SHEET 1 LINK TO PDF INSTRUCTION SHEET 2

Save this product for later
Share by: